Epoxy Stone Surface Resin Pebble Floor Epoxy Coating
Model: 2120AB-K26 Mixing Ratio: 2:1 by weight
2120AB-K26 is a 2:1 pebble floor epoxy coating for aggregate-blended pavement bases, stone surfaces and decorative floor structures. The pale blue transparent system cures into a hard, wear-resistant layer while helping bind loose mineral materials into a stronger surface. Its waterproof and insulating properties also support sealing tasks where protection and surface strength are both needed. With a short pot life of about 20 minutes at 25℃, the formula suits controlled batches and planned application steps. This resin fits pebble flooring, stone surface bonding and pavement base reinforcement that require firm curing and clear coating behavior.
Inquire
TDS
High-Adhesion, High-Gloss Epoxy Resin for Gravel Flooring
JinHua's 2:1 pebble bonding floor epoxy resin features high adhesion and high gloss. Thanks to its unique properties, this resin can be mixed with sand, gravel, pebbles, and other aggregates to firmly bond the materials together, making it ideal for creating epoxy gravel flooring. Its reliable performance and environmental friendliness make it an excellent choice for garden gravel paths and courtyard flooring.
Caution
1. The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4. Keep away from children.
5. Please take a trial before application to avoid usage mistake.
Storage And Shelf Life
1. Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2. Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is 12 months in the room temperature of 25°C.
Package
15KG per carton,standard packing is 5kgs per bottle, and 15kgs per set. Or you can choose any kind of bottle as below:
Specifications
| Item | Part A | Part B |
| Color | Light blue transparent | Light blue transparent |
| Mixing ratio | A:B=2:1(weight ratio) | |
| Viscosity(25℃) | 1000±500CPS | 400±50CPS |
| Curing Time(25℃) | 18-24h | |
| Pot life | 20mins | |
| Gravity | 1.02±0.03 | 1±0.02 |
| Hardness(Shore D) | 80±3 | |
| Shelf Life | 1 year | 1 year |
FAQ
-
Can this model used as volume ratio?
-
No, this is weight ratio 2:1, please follow this specification.
-
Is it yellow resistance?
-
yes, it is yellow resistance.
-
Does this model with bubble?
-
When you stir the resin and hardener, it will be bubbles, but it will comes out by itself when you put it there for a few minutes.