E-mail:sales@jinhuaglue.comCall now:+86 0755-27128466

E-mail:kerry@jinhuaglue.comCall now:+86 138 2354 6652

FAQ

Location:Home>FAQ>FAQ

How to Clear the Bubbles During the Curing?

There will be some bubble occurs during the mixing and stirring of the clear resin and hardener,  most of the bubble will disappear after a few minutes stand. For the left bubbles if there is, use a propane torch to clear it, but remember to not put the torch too close to the surface, sweep the torch across it rapidly.

 Or you can put the applied to a vacuum machine to clear up the bubbles if the application is not so big, this is the best way.